|
Post by mustanggt on Jan 19, 2010 13:23:17 GMT -5
My dishwasher stopped working When you turn the dial to any setting, it does nothing. Model # GSD1300N10WW Suggestions Please
|
|
|
Post by applianceman on Jan 19, 2010 19:46:44 GMT -5
Sounds like a door switcch probem or control. Check for powergoing into the door switch then check for power coming out with door closed. If power goes in but doesn't come out replace switch. If power comes out further testing is required. If no power going to switch check junction box where power enters dishwasher.
|
|
|
Post by mustanggt on Jan 20, 2010 11:57:44 GMT -5
The wires down in the box are fried. What caused this? Is it safe to reconnect the burned wires? The cord plugs in under the sink and the outlet seems to be working fine.
|
|
|
Post by applianceman on Jan 20, 2010 14:31:10 GMT -5
Usually the cause of this is a bad connection. Wire nuts should be very tight and taped. Ground should be firmly attached. I have seen many appliances with this same situation. That being said Replace the cord. Retest if it pops the breaker or melts down you will need to track down the short.
|
|
|
Post by mustanggt on Jan 22, 2010 18:19:55 GMT -5
replaced the cord and all is well. Thanks
|
|