santo
New Member
Posts: 1
|
Post by santo on Jan 19, 2010 9:44:02 GMT -5
I have a whirlpool washer when you pull the dial to start no water comes in it doesn't matter what wash cycle i think it's that water valve on the back but how do test it to be sure without buying a new one
|
|
|
Post by applianceman on Jan 19, 2010 13:06:49 GMT -5
First check that the screens are not clogged. Then check to see if you have voltage when turn on a fill cycle. No voltage would need model # If you have voltage and screens are clean replace valve.
|
|