cj
New Member
Posts: 1
|
Post by cj on Jan 16, 2010 14:27:39 GMT -5
! First post here... My Whirlpool dishwasher won't start. When I try the diagnostic cycle, it cycles through fine, then once the diagnostic is done, it still won't start. Hi It shows the two dashes in the display indicating a door problem; I took it apart and couldn't find anything obviously wrong with the latch or other door components. I even cleaned the micro switch contacts with no results. Any ideas?
|
|
|
Post by smitty on Jan 16, 2010 14:56:16 GMT -5
It shows the two dashes in the display indicating a door problem Check both switches using an ohm meter. There is also a thermal electronic fuse behind the control panel you should check.
Door Switch # 8269209 (2) Thermal fuse # 8269213
|
|