ernie
New Member
Posts: 1
|
Post by ernie on Jan 16, 2010 13:43:09 GMT -5
I have a Frigidaire ATF7000ES1 front load washer that no matter what cycle it's on won't start. You select the cycle, hit the start button a few seconds later the door lock indicator light comes on, then you hear a slight humming/buzzing sound and a few seconds later the door lock indicator light goes off and then nothing. Any idea what could be wrong.
|
|
|
Post by smitty on Jan 16, 2010 15:21:17 GMT -5
It sounds like either the Door switch is gone or the door latch/striker assembly is bad. Check ohm reading on the door switch should be around 1500 I believe. If it checks good sounds like the control board.
|
|
|
Post by applianceman on Jan 16, 2010 16:12:43 GMT -5
I agree the door switch is the likely problem. check J2 on the control board for a bad connection.
|
|